What problems should be paid attention to when installing pvc plastic wall panels
pvc corrugated sheet wholesales
1. In the process of bending pvc plastic wall panels, it is necessary to pay attention to the thickness of the wall, first draw the bending line, and then take the polyurethane material, generally about 8 mm. Try to keep it as straight as possible, and then do the bonding treatment.
2. If there is a difference between the top and bottom of the wall, make some adjustments through the pvc wood-plastic wallboard, use the least part as the bending point to trim, use the wooden strips as the fulcrum to pave the way, and wait until the top and bottom are consistent and then install the pvc wallboard. If the wall has unevenness, it can be leveled with a spirit level and installed.
plastic coated corrugated sheets supplier
3. Pay attention to the climatic conditions during installation. The indoor temperature is lower than 10 degrees Celsius, and it is not allowed to work. The place where the glue is applied must be well ventilated, and the technician must prevent the latex glue from frosting. Glue does not dry at low temperatures and is not suitable for bonding.