ยินดีต้อนรับสู่ Foshan ZXC ใหม่วัสดุ Technology Co., Ltd.
บ้าน > ข่าว > ข่าวอุตสาหกรรม > Simple Method for Identifying Synthetic Synthetic Resin Tile (1)
ข่าว
ข่าวบริษัท
ข่าวอุตสาหกรรม
ติดต่อเรา
บริการ
ติดต่อตอนนี้
ตามเรามา

Simple Method for Identifying Synthetic Synthetic Resin Tile (1)

Simple Method for Identifying Synthetic Synthetic Resin Tile (1)

2019-05-13 17:23:33

Simple Method for Identifying Synthetic Synthetic Resin tile (1)

อันดับแรก,Weigh the weight. The proportion of high-quality synthetic resin tile is about 1:2.(2.5mm thickness) The weight is about 9.6 - 10kg/m2 (2.8mm thickness) The weight is about 10.8 - 11.2kg/m2.The equivalent thickness of synthetic resin tile per square meter of weight greater than the above value is inferior resin tile.A lot of heavy calcium carbonate and other fillers have been added to inferior synthetic resin tile. Their products are brittle, easily folded, have poor impact resistance at low temperature, and have poor weather resistance, and cannot guarantee the service life of products.However, the equivalent thickness of synthetic resin tile per square meter less than the above value is also inferior resin tile.A lot of recycled old materials and other fillers have been added to the inferior synthetic resin tile. The service life of the products is not as high as 25 years.

ที่สอง,With fire.A corner of the resin tile was ignited with fire. When the fire source left, the flame immediately extinguished.The shoddy resin tile fire has a tendency to spread and has a large irritating odor.The reason is, to add a large quantity of heavy calcium carbonate to the shoddy resin tile in order to allow the product to have a certain degree of flexibility, in which a plasticizer is added, and this additive has a combustion-supporting effect, so that the product does not meet fire protection requirements and poor weather resistance , Cracked in sunlight.

ที่สาม,tapping.The texture of the resin tile is light, and the board and board.


在线客服系统