Installation and use method of fiberglass roofing tile

Installation and use method of fiberglass roofing tile

The fiberglass roofing tile has a wide range ofapplications in industrial plants, agricultural greenhouses, etc. There arestill many places in our installation and use that need our attention. Let mebriefly introduce the installation of the lighting tile for you. Instructions

1. The fiberglass roofing tile needs to be guidedbefore fixing. The hole diameter must be larger than the diameter of the fixingscrew by 6-9mm. The diameter must be greater than 50% of the diameter of thefixed wire to be used for thermal expansion and contraction to avoid theexpansion and contraction. Stress cracking and fiberglass roofing tile.

2. The fiberglass roofing tile is fixed by aluminumprofile fasteners, and the waveform fiberglass roofing tile is fixed by thelighting tile bracket and the self-tapping screw. The position of therubberized sealing tile is generally set in the middle.

3. When the fiberglass roofing tile and the steelplate are overlapped in the longitudinal direction, there must be a minimumoverlap of 200mm, and two waterstops are placed.

4. The fiberglass roofing tile is connected with theself-tapping screw and must have a waterproof cap. The lighting and heat-deformationof the fiberglass roofing tile is large, and the sound of friction is easy tooccur. Therefore, the fiberglass roofing tile should open a large hole at thetapping nail, and the flexibility of the fiberglass roofing tile should beconsidered when installing the fiberglass roofing tile.

5. When the fiberglass roofing tile is fixed, a goodflooding washer must be used, and it should be placed between the screw and thefiberglass roofing tile to make it waterproof and dustproof. After the waterproofgasket is placed inside the screw, the electric drill is used to lock into thepurlin, so that Complete the fixed work of the fiberglass roofing tile.